Cable Anchorage Test Because the cable anchorage of the self-anchored suspension bridge is located at the end of the stiffening truss, it is subjected to large cable force in the limited area. It also has the very complex geometry. To verify the strength of the anchorage and the soundness of the welding, the ultimate strength of the strand shoe anchorage was tested. The ultimate strength of the an-chor bolt and the strand shoe rod which also constitute the anchorage was also tested. The results showed that all the components of the cable anchorage satisfied the desired strength. 1,000톤 만능시험기 1,000ton-Multi Tester 앵커볼트 인장시험 Tension Test of Anchor Bolts 정착부 압축시험 Compression Test of the Cable Anchorage